ISO 618/8-2RS deep groove ball bearings

Y1:2.03; rs min:4 mm; Associated sleeve reference:H2328; Ce min:8 mm; Static load, C0:1,720 kN; Max operating temperature, Tmax:200 °C; D:300 mm; d2:181.7 mm; B:102 mm; Nlim:2,200 rpm;

J:118 mm; B:32.5 mm; T min.:-40 °C; s1:36.95 mm; Weight:2.77 kg; Recommended tightening torque for set screw:22 Nm; N:M16; H2:125 mm; S:12 mm; A1:35 mm;

N:22mm; Recommended tightening torque for set screw:3.7 Nm; T max.:200 °C; SW:3.18 mm; G:M6x1; A:37 mm; L3:57 mm; L:113 mm; Dz:70 mm; H2:56 mm;

B1:38 mm; T min.:-20 °C; J:118 mm; H2:82 mm; N1:22 mm; Adapter sleeve reference:H2306-16; Weight:1.16 kg; Designation of housing:PE206-; N:14mm; G:R1/8";

Designation of housing:C204-; S:17 mm; T max.:100 °C; H:72 mm; G:M6x1; A3:1.5 mm; B:34 mm; A5:17 mm; T min.:-20 °C; Recommended tightening torque for set screw:3.7 Nm;

Z:34.8 mm; Designation of housing:FLE209N-; T min.:-20 °C; A:37.5 mm; e:24 mm; Recommended tightening torque for set screw:8 Nm; J:148.5 mm; A2:54.2 mm; B:49.2 mm; s1:24.6 mm;

s1:22.65 mm; T min.:-40 °C; L1:47 mm; A1:33 mm; Weight:3.18 kg; T max.:100 °C; G:M6x1; H1:14 mm; J:104 mm; Z:77 mm;

L:145 mm; T max.:100 °C; A:40 mm; T min.:-20 °C; Designation of housing:EHE210-; G1:M24; A2:40 mm; C:35.1 kN; Weight:1.85 kg; d:47.62 mm;

Ball Material:Steel; Base to Center Height:Not Applicable; Shaft Attachment (2):D-Lock; Bearing Inner Ring Material:Steel; Expansion Type:Non-Expansion; Bearing Series:207 Series; Retainer Type:Std Retainer; Housing Type:Piloted Flange; Flinger Material:Steel; Bearing Bore Shape:Round;

Dw:4 mm; Lw:6 mm; Nlim (grease):4,700 rpm; Precision class:P0; d:17 mm; Max operating temperature, Tmax:120 °C; rs min:0.3 mm; Characteristic rolling element frequency, BSF:6.22 Hz; F:21.5 mm; Radial clearance class:CN;

N:14mm; L:214 mm; G:M6x1; T max.:200 °C; S:10.9 mm; H1:19.3 mm; d:49.21 mm; J:164 mm; C0:23.2 kN; B:43.5 mm;

N:35mm; Weight:18.07 kg; J:216 mm; T min.:-20 °C; C0:108 kN; s1:48 mm; C:143 kN; S:40 mm; A2:100 mm; L:280 mm;

Precision Class:ABEC 1 | ISO P0; Internal Special Features:No; rs min:0.3 mm; Product Group:B00308; Bore:0.472 Inch | 12 Mill; Static load, C0:2.39 kN; Inner Race Width:0 Inch | 0 Millimete; Characteristic rolling element frequency, BSF:4.07 Hz; Radial clearance class:CN;

S:14.3 mm; H1:15 mm; B:34 mm; d:23.81 mm; L1:25 mm; L:75 mm; A:38 mm; J:50 mm; E:18 mm; C:14 kN;

Retainer Type:Std Retainer; Housing Type:Narrow Slot Take-Up; Max Bearing Speed:3600 rpm; Bearing Locking Device:Setscrew; Flinger Type:Rubberized; Bearing Duty:Normal Duty; Ball Grade:Class 10; Ring Size:Standard; Ball Bearing Housing Series:210 Series; Bearing Series:210 Series;